PET Bottle Blow Moulding Machine
It is suitable for producing PET plastic containers and bottles from 5000-10000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the perform, the perform rotated and heated equally.
2. The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi- auto mode.
5. The machine is small with low investment, easy and safe to operate by one person.
Main part: |
Pneumatic part | Valve | SMC |
Cylinder |
Electric part | PLC | LG Mitsubishi |
Operating system | LG /HITECH |
Relay | OMRON |
Infrared thermometer | Americaraytek |
Note | All of the electrical components adopts CE. UL. CCC approved international advanced high-tech product. |
Main parameter: |
Model | KM-A4 |
Productivity | Depend on bottle design | 3200-4000PCS/H |
Product type | Body diameter | 20mm-100mm |
Height | 50mm-350mm |
Neck diameter | 15mm-38mm |
Mold | Cavity | 4cavities |
Mold thick | 240mm |
Mold | 500*500mm |
Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
Rated Power | 49kw |
Really use power | 14kw |
Air source | LP air compressor | 1.6m3/min 1.0MPa 1set (15KW) |
HP air compressor | 1.0m3/min 3.0MPa 2sets (each set 11KW) |
Air dryer | 2.0m3/min 3.0MPa 1set |
Cooling water | Cooling water | 15L/min |
Size | L*W*H | 1908*1858*1920mm |
Weight | 3600kg |
Auxiliary equipment( preform unscrambler) | L*W*H | 2000*950*2480mm |
Weight | 250kg |
Resin available | | PET |